Description: You will receive 1 gal of FC710 and 1 qt of FH611 Any questions please e-mail or call Cliffs Auto Parts at 1-800-287-6152 . 8 AM TO 6 PM Monday - Friday Saturday 9 AM TO 4 PM Cliffs Auto Parts 4727 Conowingo RD Darlington MD 21034 . Shipping is in continental US FC710 is a 4.23 VOC high solids, urethane clearcoat designed for spot and multi panel repairs. This clearcoat works well in air dry or force dry environments and provide excellent gloss, DOI, leveling, blending, and buffing characteristics NOT FOR SALE TO CALIFORNIA MARYLAND DELAWARE RESIDENCEDue to the High VOC limits for California Maryland Delaware, check your location regulations to verify it can be used in your area. 1 Gallon Mix 4:1 with hardener Made in the USA Substrates: FC710 can be applied over Basecoats or cured Single-Stage Enamels Application: Apply 2 coats, allowing each coat to flash to hand-slick between coats or a wet-on-wet “limited flash” application can be used allowing a 2-5 minute flash between coats. Adjust air pressure to: HVLP 8 - 10 psi, Conventional 50 – 60 psi ReCoat Basecoat: 10-15 minutes Single-Stage Enamels: 8 hours to overnight dry Clearcoat: Allow FC710 clearcoat to dry overnight, then scuff with 1000 grit and reapply clearcoat Drying: Air Dry Times at 70°F Dust Free: 15 minutes To Deliver: 4-6 hours Force Dry: 15 minutes @120°F surface temperature Buffing: If necessary, after 24 hours air dry, or cool down from force dry, sand with 1500 or finer grit paper and buff with the appropriate compound. Buffing is easiest when done within the first 48 hours following application. Cliffs Auto Parts
Price: 139.95 USD
Location: Darlington, Maryland
End Time: 2024-12-17T02:44:16.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 60 Days
Refund will be given as: Money Back
Manufacturer Part Number: fc710 GAL fh611QT
Brand: SHERWIN WILLIAMS
Part Brand: finish 1 GAL
